Flat deck over scale vibratory tables FD-OS

Our BEST over-scale vibrating tables are designed to settle and compact drums and bulk boxes while weighing final net contents.

The container is places in the system with the vibratory deck in the lowered position. The container is tared (scale zeroed) and then the filling operation is started. Upon reaching the first set point weight of the scale's batch controller, usually 50% of final weight, the air mounts are energized lifting the container free of the scale. Once in the raised position, the safety limit switch allows the vibrators to start and run on a timed vibration cycle. After vibrating for a few seconds, the vibration is stopped and the container is again lowered on to the scale deck. Filling has continued during the initial vibration cycle. Once the second set point is reached, usually 95% to 98% of the final net weight, the dribble sequence is energized. This allows the fill device to dribble product and trim to the final exact net weight.

High accuracies are obtainable with high speed filling rates. Special dust hoods and drum seals can be supplied when required.

Model FD-OS is for loading by fork truck, model GD-OS is loaded by container travel in a gravity or powered-roller conveyor system. Motor vibrators can be either top deck or under deck and outboard mounted free of scale area.


FD-OS-4848-2860-6-(2) flat deck over-scale table with digital weight indicator and control panel. Designed for 2,000 lb. bulk boxes.



FD-OS-3030-1980-6-(2) 30"×30" deck, over-scale design for drums and small bulk box containers.